Lube & Protect Chain Coating

Lube & Protect Chain Coating

 29,95 incl. VAT

The chain coating that can be used in ALL seasons!

Deep penetrating chain coating with Nanopore Technology. Fills the smallest imperfections in the metal down to the nanoscale (one billionth of a meter). This creates an extremely smooth surface that is fully protected and lubricated down to the smallest details. It ensures extremely low friction 0.02-0.06 (Nanopore), very smooth running and perfect shifting for a long period of time.

Tested on the DUTCH beaches and even there the chain remains free of rust!

(test method: after cycling on the beach and through the sea, the chain has not been rinsed off and after two weeks there was still no corrosion on the chain).


The chain coating is supplied in a 50 ml glass bottle with a pipette stopper.
1 full pipette is sufficient for 1 application, 1 full pipette is 1 ml. So you’ll get about 50 treatments out of one bottle.

In stock

After lubrication, a lubrication coating is created where no dust or dirt adheres. Regular lubrication of chains with Lube & Protect Chain Coating can drastically extend the life of chains.

Benefits:
Very durable
Less wear
Extremely low friction coefficient (Watt Saver)
No dirt or dust adherence
(salt) Water resistant
Deep penetrating
Very good corrosion protection
Inherently biodegradable

User manual

Shake bottle vigorously before use.
Safety precautions: Wear protective gloves / eye protection / face protection.

DEGREASE THE CHAIN

DRY THE CHAIN


First time usage: Remove the chain of the bicycle and place it in a container filled with Degrease & Clean (degreaser) mixing ratio 1:20, leave it for 2 hours and agitate the chain with a brush, clean thoroughly and dry the chain with a clean microfibre cloth and/or compressed air.


APPLY CHAIN coating

Assemble the chain and apply the coating sparingly using the pipette, one drop on each roller link on the inside of the chain. Let the chain spin with a clean cloth wrapped around the chain, this ensures that the complete chain is covered with the coating. Let it dry for at least 12 hours. Remove excess lubricant coating with a clean cloth.

Then use as desired to maintain the chain. Cleaning the chain before each application is highly recommended.
Do not use too much Lube & Protect Chain Coating on the chain; applying a thin layer works better than one thick layer.
Note !: Degrease new chains as well before you apply this chain coating.

Safety regulations:

Wear protective gloves/ eye protection/ face protection.
IF SWALLOWED: Immediately contact a doctor.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and continue rinsing.

In case of skin irritation or rash: consult a doctor, ifpersistent eye irritation: get medical advice.

DO NOT induce vomiting. Repeated exposure can cause skin dryness or cracking.

Reviews

There are no reviews yet.

Add a review